Smart Cup Coaster

<h2>Project Overview</h2> <p>A coaster that senses cup temperature via TMP006 sensor and displays LED feedback.</p> <h2>Bill of Materials (BOM)</h2> <ul> <li>Arduino Pro Mini</li> <li>Adafruit TMP006 contactless temperature sensor</li> <li>3D printed parts for the coaster body</li> <li>and a power source.</li> </ul> <h2>Circuit Diagram & Component Arrangement</h2> <p>Follow the wiring diagram below. Each component connects to specific pins on the microcontroller. Use a breadboard for prototyping and ensure all connections are secure before powering on.</p> <p><strong>Wiring Summary:</strong> The TMP006 sensor connects to the Arduino Pro Mini's I2C pins. The Arduino reads the temperature of the cup placed on the coaster and can trigger an action, like changing an LED color.</p> <h2>Step-by-Step Procedure</h2> <ol> <li><strong>Step 1 - Prepare Components:</strong> Gather all components from the BOM. Inspect for damage and verify ratings.</li> <li><strong>Step 2 - Breadboard Layout:</strong> Place the microcontroller on the breadboard. Arrange components for clear wiring paths.</li> <li><strong>Step 3 - Power Connections:</strong> Connect VCC and GND first. Ensure proper polarity for polarized components.</li> <li><strong>Step 4 - Signal Wiring:</strong> Connect sensors and actuators per the wiring table. Double-check pin assignments.</li> <li><strong>Step 5 - Upload Code:</strong> Connect USB, load the sketch, and upload. Verify serial output if applicable.</li> <li><strong>Step 6 - Test & Calibrate:</strong> Power on and test each function. Calibrate sensors if needed.</li> <li><strong>Step 7 - Enclosure (Optional):</strong> Mount in a 3D-printed or custom enclosure for durability.</li> </ol> <h2>Safety Notes</h2> <ul> <li>Always disconnect power before making wiring changes.</li> <li>Use appropriate eye protection when soldering.</li> <li>Adult supervision is required for makers under 16.</li> <li>Do not exceed voltage ratings of components.</li> </ul>