article
February 8, 2023
3 min read
0 views
Pinecil V2 Soldering Iron: A Bench Engineer's Honest Assessment
The Pinecil V2 is genuinely good at 90% of my bench work. The 10% where a Hakko 888D still wins matters for fine-pitch QFN rework.
The Pinecil V2 is genuinely good at 90% of my bench work. The 10% where a Hakko 888D still wins matters for fine-pitch QFN rework.
Overview
This note is part of the field-notes archive generated for this site. The summary below is the published excerpt; you can expand the full write-up anytime in the CMS.
Related notes
Tags
- soldering
- hardware-review
- tools
- electronics
- bench-tools
M
Manish Bookreader
Electronics enthusiast, Embedded Systems Expert, Linux/Networking programmer, and Software Engineer passionate about AI, electronics, books, and cooking.
