article
February 3, 2024
4 min read
0 views
I2S Audio Streaming on STM32H7 to a PCM5102 DAC
Getting clean I2S audio out of an STM32H7 through a PCM5102 DAC requires attention to DMA double-buffering, PLL configuration, and the codec's startup sequence.
Getting clean I2S audio out of an STM32H7 through a PCM5102 DAC requires attention to DMA double-buffering, PLL configuration, and the codec's startup sequence.
Overview
This note is part of the field-notes archive generated for this site. The summary below is the published excerpt; you can expand the full write-up anytime in the CMS.
Related notes
Tags
- i2s
- audio
- stm32
- dma
- tutorial
M
Manish Bookreader
Electronics enthusiast, Embedded Systems Expert, Linux/Networking programmer, and Software Engineer passionate about AI, electronics, books, and cooking.
