article
August 21, 2023
4 min read
0 views
Differential Pair Routing Rules for USB 2.0 and USB 3.0 on a 4-Layer PCB
USB 2.0 differential pairs tolerate modest impedance variation. USB 3.0 SuperSpeed does not. The length matching, impedance control, and via stub rules that differ between them.
USB 2.0 differential pairs tolerate modest impedance variation. USB 3.0 SuperSpeed does not. The length matching, impedance control, and via stub rules that differ between them.
Overview
This note is part of the field-notes archive generated for this site. The summary below is the published excerpt; you can expand the full write-up anytime in the CMS.
Related notes
Tags
- usb
- differential-pair
- pcb-design
- signal-integrity
- high-speed
M
Manish Bookreader
Electronics enthusiast, Embedded Systems Expert, Linux/Networking programmer, and Software Engineer passionate about AI, electronics, books, and cooking.
