article
November 30, 2021
4 min read
0 views
Building a Modbus RTU Slave on STM32G4 With a Validated CRC
Modbus RTU is still everywhere in industrial equipment. A clean slave implementation on STM32G4 with hardware CRC validation and RS-485 half-duplex direction control.
Modbus RTU is still everywhere in industrial equipment. A clean slave implementation on STM32G4 with hardware CRC validation and RS-485 half-duplex direction control.
Overview
This note is part of the field-notes archive generated for this site. The summary below is the published excerpt; you can expand the full write-up anytime in the CMS.
Related notes
Tags
- modbus
- stm32
- rs-485
- industrial
- tutorial
M
Manish Bookreader
Electronics enthusiast, Embedded Systems Expert, Linux/Networking programmer, and Software Engineer passionate about AI, electronics, books, and cooking.
